9
UK
4.7 IO-Link
This unit has an IO-Link communication interface for parameter setting�
With a PC, suitable IO-Link software and an IO-Link adapter cable communication
is possible when the system is not in operation�
The IODDs necessary for the configuration of the unit, detailed information about
process data structure, diagnostic information, parameter addresses and the
necessary information about the required IO-Link hardware and software can be
found at www�ifm�com�
5 Mounting
CAUTION
For medium temperatures above 50 °C (122 °F) some parts of the housing can
heat up to over 65 °C (149 °F).
> Risk of burns�
►
Protect the housing against contact with flammable substances and
unintentional contact�
►
Ensure that the system is free of pressure during installation�
►
Ensure that no media can leak at the mounting location during installa-
tion�
Using process adapters the unit can be adapted to different process connections�
Adapters have to be ordered separately as accessories�
• Information about the available mounting accessories at www�ifm�com�
• A correct fit of the unit and ingress resistance of the connection are only en-
sured using ifm adapters�
►
Observe the instructions of the mounting accessories�
►
Use a lubricating paste which is suitable and approved for the applica-
tion� Grease the threads of the process connection, adapter and sensor�
Ensure no grease is applied to the sensor tip�
