During operation you can use 2 types of menu items:
• Sensor-specific parameters
• Menu items for actions of the PP2000
The measuring and evaluation characteristics of the sensor depend on
these parameters. For explanations on these parameters please see the
operating instructions of the appropriate sensor.
These menu items
Sto
and
Snd
are included in the sequence of sen-
sor-specific parameters. (
→
operating instructions of the appropriate
sensor).
Take the following 3 steps for programming
The following applies to all settings:
• If no button is pressed for 15s, the program returns to the preceding
menu level.
• If modifications of the parameter values have not been confirmed,
the previous values remain effective.
• If you change the parameters during operation, the functioning of
the plant will be affected. Ensure that plant malfunction is prevent-
ed.
By PP2000 the sensor can be electronically locked to prevent unwant-
ed adjustment of the set parameters: Press (in Run mode) both setting
buttons for 10s. As soon as the indication goes out the unit is locked
or unlocked. Units are delivered from the factory in the unlocked state.
With the unit in the locked state
is indicated when you try to
change parameter values.
page 18
Sensor-specific
parameters
Menu items for
actions of the PP2000
Programming
Locking / Unlocking
Programming generally
= select: activates a memory location of PP2000
(only active if no sensor is connected)
= store: stores parameters in PP2000
= send: transfers parameters from a memory location of PP2000
to the sensor
Press Mode/Enter button: select menu items / parameters
1
2
3
Press Set button: set parameter value, carry out action
Press Mode/Enter button: confirm setting
