14
10 Operation
After power on, the unit is in the Run mode (= normal operating mode)� It carries
out its measurement and evaluation functions and provides output signals
according to the set parameters�
Information on the operation indications: → chapter 7 Operating and
display elements�
10.1 Read set parameters
► Press [Mode/Enter] until the requested parameter is displayed.
►
Press [Set] briefly�
>
The unit displays the corresponding parameter value for approx. 15 s. After
another 15 s it returns to the Run mode�
10.2 Error indications
[OL]
Overload pressure (above measuring range)�
[UL]
Underload pressure (below measuring range)�
[SC1]
Short circuit in OUT1*.
[SC2]
Short circuit in OUT2*.
[SC]
Short circuit in both outputs*.
[Err]
Flashing: internal fault�
*The output concerned is switched off as long as the short circuit exists.
The messages SC1, SC2, SC, Err are shown even if the display is switched off.
10.3 Setting ranges
SP1 / SP2
rP1 / rP2
ΔP
min
max
min
max
PN014A
bar
-0�90
10�00
-0�95
9�95
0�05
PSI
-13
145
-14
144
1
MPa
-0�090
1�000
-0�095
0�995
0�005
PN016A
bar
0�02
2�50
0�01
2�49
0�01
PSI
0�4
36�2
0�2
36�0
0�2
kPa
2
250
1
249
1
ΔP = step increment
