13
UK
9.5 User settings (optional)
9.5.1 Setting of the delay time for OUT1
[dS1] = switch-on delay
[dr1] = switch-off delay for OUT1 / OUT2
►
Select [dS1] or [dr1] and set a value between 01 and 50 s (at 00 the
delay time is not active)
9.5.2 Setting of the damping for OUT1
►
Select [dAP] and set a value
dAP value = response time between pressure change and change of the
switching status in milliseconds
The value for dAP defines the switching frequency (f) of the output, the
following fixed values can be set:
dAP
3
6
10
17
30
60
125 250 500
f [Hz] 170
80
50
30
16
8
4
2
1
9.6 Service functions
9.6.1 Reading of the min/max values for system pressure
►
Select [HI] or [LO], briefly press [Set]
[HI] = maximum value, [LO] = minimum value
Delete memory:
►
Select [HI] or [LO]
►
Press [Set] and keep it pressed until [----] is displayed
►
Press [Mode/Enter] briefly
[LO] is available only for PN004A and PN009A