IFM OPD101, Руководство по эксплуатации

Страница: 33 / 40

OPD101
33
u Confirm your selection by pressing [●].
w
The output function for OUT1 is confirmed.
• [High active]: OUT1 is switched on if matching value > switching threshold.
• [Low active]: OUT1 is switched on if matching value < switching threshold.
• In the trigger mode [CONT], OUT2 is automatically set as complementary switching output to
OUT1.
11.3.7 [Output logic]
Set the switching logic for all inputs and outputs
u
Confirm the parameter with [●] and select one of the two options [PNP] / [NPN] using [▲ / ▼].
u
Confirm your selection by pressing [●].
w
The switching logic is confirmed.
11.3.8 [Profile source select]
Information output on the reference profile selection source
u
Confirm the parameter with [●].
• [local]: Active reference profile can be defined via the display menu. Parameter level basic
functions (
Ò /
29).
• [PDOut]: The active reference profile is defined via IO-Link or the ifm parameter setting software
“Vision Assistant”.
The selection source [local] / [PDOut] is defined exclusively via IO-Link or the ifm parameter
setting software “Vision Assistant”.
Factory setting = [local]
11.3.9 [Back]
Finish parameter setting
u Confirm the parameter with [●].
w Display changes to [Configuration].
11.4 Submenu [Display]
11.4.1 [Brightness]
Set display brightness
u Confirm the parameter with [●] and select one of the two options [ON] / [OFF] using [▲ / ▼].
u
Confirm your selection by pressing [●].
w
The display brightness is confirmed.
If [OFF] is selected, the display goes blank 20 seconds after the last pushbutton has been
pressed. Press pushbutton again to reactivate the display.
11.4.2 [Colour]
Set display colour for the matching value
GB