5
UK
5.2 Receiver
5.2.1 PNP
Pin 1 = L+ (10...30 V DC)
Pin 3 = L-
Pin 4 = load (PNP, 200 mA) / IO-Link
(Pin 2 = not connected)
5.2.2 NPN
Pin 1 = L+ (10...30 V DC)
Pin 3 = L-
Pin 4 = load (NPN, 200 mA) / IO-Link
(Pin 2 = not connected)
6 Settings
6.1 Set via IO-Link
This unit has an IO-Link communication interface which enables direct access to
process and diagnostic data� In addition it is possible to set the parameters of the
unit while it is in operation� Operation of the unit via the IO-Link interface requires
an IO-Link master�
With a PC, suitable IO-Link software and an IO-Link adapter cable communication
is possible while the system is not in operation�
The IODDs necessary for the configuration of the unit, detailed information about
process data structure, diagnostic information, parameter addresses and the
necessary information about the required IO-Link hardware and software can be
found at www�ifm�com�