4
4 Installation
►
Secure the receiver to a bracket�
►
Align the transmitter to the receiver and also secure it to a bracket�
> Maximum range only with accurate alignment�
5 Electrical connection
The unit must be connected by a qualified electrician�
►
The national and international regulations for the installation of
electrical equipment must be adhered to�
►
Ensure voltage supply to EN 50178�
►
Disconnect power�
►
Connect the unit as follows:
5.1 Transmitter
Original Wiring Drawing (MTD)
EPS Source
Product Scale Drawing
Frame Size: 36 mm x 26 mm
AN_i_1535
L+
L
1
4
3
L+
L
1
4
3
Pin 1 = L+ (10...30 V DC)
Pin 3 = L-
Pin 4 = IO-Link
(Pin 2 = not connected)