LMT0xA
Binary level sensor
4
2 Safety instructions
•
The unit described is a subcomponent for integration into a system.
– The system architect is responsible for the safety of the system.
– The system architect undertakes to perform a risk assessment and to create documentation in
accordance with legal and normative requirements to be provided to the operator and user of
the system. This documentation must contain all necessary information and safety instructions
for the operator, the user and, if applicable, for any service personnel authorised by the
architect of the system.
•
Please adhere to the notes on safe use in hazardous areas: Operating instructions (Ex protection
related part) for level sensors according to the EU directive 94/9/EC annex VIII (ATEX) group II,
equipment category 3D/3G.
•
If no operating instructions (Ex protection related part) or EC declaration of conformity are supplied
with this product in the language of the EU user country, these can be requested from your dealer
(see delivery note) or manufacturer (see cover sheet / back).
•
Only use the product for its intended purpose (
Ò
Intended use).
•
Only use the product for permissible media (
Ò
Technical data).
•
If the operating instructions or the technical data are not adhered to, personal injury and/or damage
to property may occur.
•
The manufacturer assumes no liability or warranty for any consequences caused by tampering with
the product or incorrect use by the operator.
•
Installation, electrical connection, set-up, operation and maintenance of the product must be
carried out by qualified personnel authorised by the machine operator.
•
Protect units and cables against damage.
