UK
Inclination sensor JN
5
3 Functions and features
The 2-axis inclination sensor with CANopen interface enables angle levelling and
position detection of mobile machines.
Typical applications are, for example, the position detection of access platforms,
levelling of mobile cranes or set-up of mobile machines.
Properties:
●
2-axis inclination sensors with a measuring range of ±45°
●
High accuracy and resolution
●
CANopen interface to CiA DS-301 and device profile CiA DSP-410
●
The module supports „LSS-Slave“, "node guarding" and "heartbeat"; "guard
time", "life time factor" as well as "heartbeat time" can be configured.
●
High sampling rate and band width
●
Configurable limit frequency (digital filter) for vibration suppression
●
CANopen functions
– Transmit PDOs (RTR, cyclical, synchronised)
– SYNC consumer (synchronised transmission of the transmit PDOs after
reception of a SYNC telegram)
– EMCY producer (exceeding of limit value, monitoring of the inside device
temperature)
– Failure monitoring by means of heartbeat or node guarding / life guarding
●
Programming key
●
Inversion of the angle values / reversal of direction of rotation
●
Automatic data backup (autosave) and autostart function
4 Installation
4.1 Fixing
►
Fasten the device using 4 M5 screws on a flat surface.
Screw material: steel or stainless steel.
4.2 Mounting surface
The housing must not be exposed to any torsional forces or mechanical
stress.
►
Use compensating elements if there is no flat mounting surface available.