IFM efector300 SI6000, Руководство по эксплуатации

Страница: 7 / 17

7
UK
► Mount the adapter (D) on the unit (A).
► Fix the unit + adapter to the process connection by means of a coupling nut, a
clamp flange or the like (B)�
If it is not possible to slide the fixing element (B) down over the top of the unit:
Slide it up over the bottom of the sensor before the adapter is mounted�
Mounting the adapter
► Slightly grease the threads and sealing areas of the sensor and adapter with
lubricating paste�
The paste must be suitable and approved for the application and compatible
with the elastomers used�
Recommendation: Klüber paste UH1 84-201 with USDA-H1 approval for the
food industry�
► Make sure that the O-ring (C) is correctly positioned�
► Screw the unit into the adapter until it is hand-tight� Avoid mechanical influence
on the sealing areas�
► Clamp unit and adapter into a clamping device (E)� The sealing areas (F) must
not be damaged�
► Tighten the unit slightly using a spanner until you can feel the end stop (this
corresponds to a maximum tightening torque of 25 Nm). NOTE: Further tight -
ening may affect the sealing effect
NOTE: A guarantee for long-term stable and maintenance-free fitting with no bug
traps in the hygienic sealing of the metal seal (Aseptoflex connection) is only valid
for once-only mounting�
Mounting by means of a welding adapter
► Weld adapter in the pipe or the tank�
► After the unit has cooled down insert and tighten it� Follow the instructions
included with the adapter�