background image

16

With increased foam formation the setting [MEdI] = [MId] is recommended 

(→ 11.6.2)

.

Depending on the operating conditions and the mechanical structure of the 

bypass or still pipe such as rod does not run centred, flow routes rod to the 

tank wall, soiling, ... the use of centring pieces is recommended. 

 

If required, provide for one or several centring pieces between the rod 

and the pipe.

7.1.2  Notes on the tank adjustment

To improve the signal quality a tank adjustment can be made 

(→ 11.2.2)

. For the 

tank adjustment it is necessary to enter an "adjustment distance" first. Within 

this distance, starting with the process connection, the interfering reflections are 

compensated. 

 

Select an adjustment distance size (a) so that the connection piece (S) and 

structures in the tanks (B) are completely detected.

 

Observe safety distances (b) to the level or the rod end b 

 250 mm.

b

a

B

S

a: 

b: 

S: 

B:

Adjustment distance (min.: 10 mm; max.: L - 250 mm) 

Safety distance to the level or the rod ends: b ≥ 250 mm 

 

Connection piece 

Structures in the tank

Содержание efector160 LR2750










































Отзывы: