IFM E30398 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 19

IFM E30398 Скачать руководство пользователя страница 6

6

3 Factory setting

On delivery the memory plug is empty

(no parameter set saved)�
When the supply voltage is applied,

the LED WRITE flashes slowly (1 Hz)�

In this state one parameter set can be

written to the memory plug once�

Then it changes to the mode [Write

protected]�

To write a new parameter set to the device, the memory plug has to be

reset to the factory setting

(→ 6.6 Configure the memory plug via LR DEVICE)

�

4 Functions and features

The memory plug saves parameter sets of IO-Link devices� It offers the following

options:
• Bi-directional backup for IO-Link V1�1 sensors�

• Bi-directional backup for IO-Link V1�0 sensors from ifm electronic�

• Preconfiguration as data carrier via PC�

4.1 Applications without PC

•

Save the parameter set of a sensor once → 6.1.

•

Save the parameter set of a sensor continuously → 6.2.

• Copy the parameter set of a sensor (copy to several sensors of the same type;

e�g� in series production or for fast set-up)

(→ 6.3 Copy the parameter set of a sensor)

�

• Set the parameters of replacement sensors (without using further tools, without

configuration tools or menu handling)

(→ 6.4)

�

• Restore the parameter set of a sensor (e�g� during start-up of an installation)

(→ 6.5)

�

«
...
4
5
6
7
8
...
»

Содержание E30398




















Отзывы:

Нет отзывов