IFM DTE801, Руководство по установке

Страница: 20 / 25

20
8.4 LED indicators DTE802
The following LED indicators only apply to DTE802�
8.4.1 LED Mod (module status)
LED red LED green Status Note
off off no voltage supply check the voltage supply
off flashing ready for operation
Device is not configured�
There is no exchange of data:
► Check the connection of
the Ethernet/IP scanner�
► Check the parameter
setting of the configuration
assembly�
off on normal operation
Connection to the EtherNet/
IP scanner is established�
The device is configured� The
data transfer is running�
flashing off minor error
A connection to the EtherNet/
IP scanner was not
established:
► Check the voltage supply�
► Check the configuration of
the device�
on off major error
Software / hardware error of
the device:
► Reboot the device�
> If the error remains, send
the device to the service�
flashing flashing self-test starting phase of the device