IFM DTE801, Руководство по установке

Страница: 19 / 25

19
UK
8.3 LED indicators DTE801
The following LED indicators only apply to DTE801�
8.3.1 LED SF
LED red LED green Status Note
off off no voltage supply check the voltage supply
off flashing
"node flash test", initiated by
PROFINET IO controller
-
off on normal operation -
flashing off error at channel level
- temperature
- internal fault
on off error at device level temperature
flashing flashing self-test starting phase of the device
8.3.2 LED BF
LED red LED green Status Note
off off no voltage supply check the voltage supply
off flashing
PROFINET IO controller is in
STOP mode
-
off on
PROFINET IO controller is in
RUN mode
-
flashing off
connection to the PROFINET
IO controller is established,
no valid configuration
check configuration
on off
no connection to the
PROFINET IO controller
check connection
flashing flashing self-test starting phase of the device