IO-Link Master with Modbus TCP Interface DataLine 4 Ports IP 65 / IP 66 / IP 67
25
>
9.1
LR DEVICE
Content
Remarks .................................................................................................................................................26
IoT: Configure IP settings .......................................................................................................................27
IoT: Configure security mode .................................................................................................................28
IoT: Configure access rights ...................................................................................................................29
IoT: Configure the interface to LR AGENT or LR SMARTOBSERVER .................................................30
Fieldbus: Configure IP settings ..............................................................................................................31
Fieldbus: set the length of the process data...........................................................................................32
IO-Link ports: Activate data transfer to LR AGENT or LR SMARTOBSERVER ..................................32
IO-Link ports: Configure operating mode ...............................................................................................33
IO-Link ports: Set the device validation and data storage ......................................................................34
IO-Link ports: set fail-safe values ...........................................................................................................35
Info: Show device information ................................................................................................................35
Firmware: Reset device to factory settings ............................................................................................36
Firmware: Reboot the device..................................................................................................................36
Configure IO-Link devices ......................................................................................................................37
33692
On delivery, the AL1340 is configured with the factory settings (
→
Factory settings
(
Required software: LR DEVICE (1.5.0.x or higher) (art.-no.: QA0011/QA0012)