4
4 Installation
► Disconnect power before installation.
Fix the AS-i module onto a 35 mm rail.
The mounting orientation has no adverse effect on the function.
► As an alternative, fix the AS-i module onto a mounting adapter (supplied).
4,2
28
45
35
7,5
4.1 Fitting of the illuminated pushbuttons (AC2386)
► Screw the requested upper parts (colour plates) onto the cover supports.
► Place the complete covers into the requested position. Turn them so that the 4
cross-shaped grooves are located over the ridge cross of the holder.
► Slightly press the cover until it snaps into place.
You can remove the cover by means of a small screwdriver.
5 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical equipment
must be adhered to.
► Disconnect power.
► Connect the unit.
To ensure the protection rating
► Connect the AS-i connector to the M12 socket.
► Tighten firmly, recommended tightening torque 0.3...0.5 Nm.
