SmartPLC DataLine with EtherCAT slave interface
8
2
Safety instructions
Content
General safety instructions ....................................................................................................................... 8
Required background knowledge ............................................................................................................. 8
Tampering with the unit ............................................................................................................................ 8
28333
>
2.1
General safety instructions
41415
Read this document before setting up the product and keep it during the entire service life.
Only use the product for its intended purpose.
If the operating instructions or the technical data are not adhered to, personal injury and/or damage to
property may occur.
Improper or non-intended use may lead to malfunctions of the device, to unwanted effects in the
application or to a loss of the warranty claims.
The manufacturer assumes no liability for any consequences caused by tampering with the device or
incorrect use by the operator.
► Observe these operating instructions.
► Adhere to the warning notes on the product.
>
2.2
Required background knowledge
41648
This document is intended for specialists. Specialists are people who, based on their relevant training
and experience, are capable of identifying risks and avoiding potential hazards that may be caused
during operation or maintenance of the product.
For programming these people should also have knowledge of control technology experience in PLC
programming to IEC 61131-3.
The document contains information about the correct handling of the product.
>
2.3
Tampering with the unit
33190
WARNING!
Tampering with the unit.
>
In case of non-compliance:
Possible affects on safety of operators and machinery
Expiration of liability and warranty
► Do not open the devices!
► Do not insert any objects into the devices!
► Prevent metal foreign bodies from penetrating!
