IFM AC1433, Руководство по эксплуатации устройства

Страница: 48 / 168

SmartPLC DataLine with EtherCAT slave interface
48
>
5.4 AS-i 1 / AS-i 2
41522
The [AS-i 1] and [AS-i 2] menus provide access to configuration functions of the AS-i networks.
The [AS-i 2] menu is only available for devices with two AS-i masters!
Navigation path Content
>
>
AS-i master settings
→
Set the operating mode of the AS-i master
(
→ S.
49 )
→
Carry out a projection adaptation
(
→ S.
50 )
→
Set the monitoring functions of the AS-i master
(
→ S.
51 )
>
>
AS-i network diagnosis
→
Display and reset the error counters
(
→ S.
52 )
→ Display the error statistics of the AS-i slaves
(
→ S.
52 )
→ Display the voltage supply analysis
(
→ S.
53 )
→
Display and reset performance data
(
→ S.
53 )
>
>
AS-i slave settings
→
Display the input/output data of the AS-i slave
(
→ S.
54 )
→ Change the digital output values manually
(
→ S.
56 )
→
Change the analogue output values manually
(
→ S.
57 )
→
Show AS-i slave information
(
→ S.
57 )
→ Change an AS-i slave address
(
→ S.
58 )
→ Change an AS-i slave parameter output
(
→ S.
58 )
→ Change the Extended ID1 of the AS-i slave
(
→ S.
59 )