IFM AC1433, Руководство по эксплуатации устройства

Страница: 51 / 168

SmartPLC DataLine with EtherCAT slave interface
51
>
Set the monitoring functions of the AS-i master
41641
To set the monitoring functions of the selected AS-i master:
1 Select the menu page
► > or >
2 Set the monitoring functions of the AS-i master
►
Set the following parameters as required:
Parameter Description Possible values
[Automatic addressing] Behaviour if AS-i slave is
replaced (
→ Protected mode
(
→ S.
122 ))
Automatic addressing disabled
Automatic addressing enabled
[Earth fault detection] Detection of earth faults
Do not detect earth faults in the AS-i system
Detect earth faults in the AS-i system
[Double address detection] Double address detection
Do not detect AS-i slaves with the same address
Detect AS-i slaves with the same address
> Selected values are applied.