SmartPLC DataLine with EtherCAT slave interface
53
>
Display the voltage supply analysis
41502
To display the voltage supply analysis:
1 Select the menu page
►
>
or
>
►
Select [Power supply] tab.
2 Display the voltage supply analysis
>
Page shows the following information:
Name
Description
Possible values
[Power supply]
Method of voltage supply
[Aux]
Voltage is supplied separately by the AS-i network
and AUX 24 V.
[AS-i]
Voltage is only supplied by the AS-i network.
[Power24]
Voltage is supplied by data decoupling module.
[AS-i voltage]
AS-i voltage measured (in [V])
e.g.
30.3 V
[DC earth fault]
Evaluation of the network symmetry
AS-i network is symmetrical
AS-i network is asymmetrical
AS-i network has earth fault
Graphical representation of the network symmetry:
>
Display and reset performance data
41460
To display the performance statistics of the selected AS-i master:
1 Select the menu page
►
>
or
>
►
Select [Performance] tab.
2 Display performance data
>
Page shows the following information:
Designation
Description
[Activated slaves]
Number of active AS-i slaves on the AS-i network
[AS-i cycle time [ms]]
AS-i cycle time (value in [ms])
[minimum]
shortest cycle time
[maximum]
longest cycle time
[current]
current cycle time
3 Optional: reset the performance data
►
Press [Reset] button.
>
The saved statistic data for minimum and maximum cycle times are deleted.
