IFM AC1433, Руководство по эксплуатации устройства

Страница: 119 / 168

SmartPLC DataLine with EtherCAT slave interface
119
>
8.4 Configuration interfaces: Connection concepts
Content
Direct connection ..................................................................................................................................119
Connection via Ethernet network .........................................................................................................120
42146
The device has 2 configuration interfaces X3 and X8 (
→ Ethernet configuration interfaces
(
→ S.
13 )).
To use the interface functions configuration interface X3 or X8 has to be connected to the necessary
IT infrastructure. The device supports the following connection types:

Direct connection
(
→ S.
119 )

Connection via Ethernet network
(
→ S.
120 )
>
8.4.1 Direct connection
42925
► Connect either configuration interface 1 (X3) or 2 (X8) to the PC/laptop via Ethernet cable.
► Set the IP parameters of the configuration interface according to the requirements.
(→ Address assignment in Ethernet networks (→ S. 118 ))
> User can access the web interface and/or programming interface of the device.
The selected configuration interface must not be used as EtherCAT master!