background image

4

1  Preliminary note

1.1  Notes on this document

This document applies to devices of the type „AS-i Profinet gateway“ (art� no�: 

AC1401 /AC1402)� 

It is part of the device and contains information about the correct handling of the 

product�
This document is intended for qualified electricians� These specialists are people 

who are qualified by their training and their experience to see and to avoid 

possible hazards that may be caused during operation of the device�

 

Read this document before using the device�

 

Keep this document during the service life of the device�

1.2  Symbols used

Instructions

>

Reaction, result

[…] Designation of pushbuttons, buttons or indications

Cross-reference

Important note 

Non-compliance can result in malfunction or interference�

Information 

Supplementary note

2  Safety instructions

2.1  General

 

Observe these operating instructions�

 

Adhere to the warning notes on the product�

Non-observance of the instructions, operation which is not in accordance with use 

as prescribed below, wrong installation or incorrect handling can affect the safety 

of operators and machinery�

2.2  Installation and connection

The device must only be installed, connected and put into operation by a qualified 

electrician as the safe function of the device and machinery is only guaranteed 

when installation is correctly carried out� 

Содержание AC1401
















Отзывы: