121
ifm
Device Manual Supplement: Acyclic data records and Command interface (AC14 and AC4S)
2017 / 09
Index
5
Index
A
Acyclic data records................................................................................. 9
AS-i master commands ......................................................................... 57
AS-i master status flags ......................................................................... 13
C
Command 0x0001 – Change parameters of an AS-i slave................... 63
Command 0x0003 – Project the currrent AS-i network ......................... 65
Command 0x0004 – Change LPS ......................................................... 66
Command 0x0005 – Change the operating mode of the AS-i master .. 67
Command 0x0006 – Change AS-i slave address ................................. 68
Command 0x0007 – Set the auto address mode of the AS-i master ... 70
Command 0x0009 – Change extended ID1 in the AS-i slave .............. 71
Command 0x000A – Change PCD ....................................................... 73
Command 0x000D – AS-i master supply voltage, symmetry, earth fault
............................................................................................................... 74
Command 0x0015 – Read ID string of an AS-i profile (S-7.4) .............. 76
Command 0x001A – Read AS-i master info ......................................... 79
Command 0x001C – Deactivate slave reset when changing to the
protected mode ...................................................................................... 80
Command 0x0021 – Read diagnosis string of an AS-i slave (S-7.4).... 81
Command 0x0022 – Read parameter string of an AS-i slave (S-7.4) .. 83
Command 0x0023 – Write parameter string of an AS-i slave (S-7.4)... 85
Command 0x0024 – CTT2 Standard .................................................... 87
Command 0x0025 – CTT2 standard write ............................................ 89
Command 0x0026 – CTT2 Vendor Specific Read ................................ 91
Command 0x0027 – CTT2 Vendor Specific Write ................................ 93
Command 0x0040 – CTT2 device group read ...................................... 95
Command 0x0041 – CTT2 Device Group Write ................................... 97
Command 0x0042 – CTT2 Vendor Specific Selective Read From Buffer
............................................................................................................... 99
Command 0x0043 – CTT2 Vendor Specific Selective Write From Buffer
............................................................................................................. 101
Command 0x0044 – CTT2 Vendor Specific Selective Read .............. 103
Command 0x0045 – CTT2 Vendor Specific Selective Write .............. 105
Command 0x0046 – CTT2 device group selective Rread .................. 107
Command 0x0047 – CTT2 Device Group Selective Write.................. 109
Command 0x0049 – CTT2 Vendor Specific Exchange ...................... 111
Command 0x004A – CTT2 Device Group Exchange ......................... 113
Command 0x004B – CTT2 Device Group Selective Read From Buffer
............................................................................................................. 115
Command 0x004C – CTT2 Device Group Selective Write From Buffer
............................................................................................................. 117
Command 0x0050 – Adjust AS-i master settings................................ 119
Command 0x0051 – Reset error counter ............................................ 120
Command 0x0101 – Quick setup AS-i master 1 + 2 ............................. 40
Command 0x0103 – Select user language ........................................... 42
Command 0x0104 – Change display settings ....................................... 44
Command 0x0105 – Set output control ................................................. 45
Command 0x0106 – Set standard PLC operating mode ...................... 46
Command 0x0109 – Set date/time ........................................................ 47
Command 0x010A – Set parameters of the NTP server ...................... 49
Command 0x010B – Read date / time / NTP settings .......................... 51
Command 0x010C – Reboot system .................................................... 52
Command 0x010D – Read fieldbus info................................................ 53
Command 0x010F – Read message text of an OSC entry................... 54
Command 0x0110 – Display target visualisation .................................. 56
Command channels ............................................................................... 36
Command reply channel (device >>> fieldbus master) ........................ 56
Command request channel (fieldbus master >>> device) 40, 42, 44, 45,
46, 47, 49, 51, 52, 53, 54, 56, 63, 65, 66, 67, 68, 70, 71, 73, 74, 76, 79,
80, 81, 83, 85, 87, 89, 91, 93, 95, 97, 99, 101, 103, 105, 107, 109, 111,
113, 115, 117, 119, 120
Command response channel (device >>> fieldbus master) ... 41, 43, 44,
45, 46, 48, 50, 51, 52, 53, 55, 64, 65, 66, 67, 69, 70, 72, 73, 75, 77, 79,
80, 82, 84, 86, 88, 90, 92, 94, 96, 98, 100, 102, 104, 106, 108, 110,
112, 114, 116, 118, 119, 120
Command status .................................................................................... 37
CTT2 error object ................................................................................... 62
D
DAE/EE flags ......................................................................................... 16
Details 4 channels per analogue slave............................................22, 23
Details of the 5-word areas ..............................................................18, 20
Details of the error lists .......................................................................... 32
Details of the slave lists ...................................................................25, 26
DS1 – System information ..................................................................... 11
DS10 – Slave list LPS ......................................................................... 26
DS11 – Actual configuration data (CDI) ................................................ 27
DS12 – Projected configuration data (PCD) ......................................... 28
DS13 – Image of the input parameters of the slaves (PI) ..................... 29
DS14 – Image of the output parameters of the slaves (PP) ................. 30
DS15 – Slave error counter, configuration error counter, AS-i cycle
counter ................................................................................................... 31
DS17 – AS-i master
Error lists LCEMS, LCEAS, LDAE ................................................................ 32
DS18 – Fieldbus information ................................................................. 33
DS2 – Digital inputs of the slaves and master flags .............................. 12
DS3 – Analogue inputs of slaves 1(A)...15(B) ....................................... 17
DS4 – Analogue inputs of slaves 16(A)...31(B) ..................................... 19
DS5 – Digital outputs of the slaves ....................................................... 21
DS6 – Analogue outputs of slaves 1(A)...15(B) .................................... 22
DS7 – Analogue outputs of slaves 16(A)...31(B) .................................. 23
DS8 – Status flags of analogue output data of the slaves 1...31 .......... 24
DS9 – Slave lists LAS, LDS, LPF, LCE ................................................. 25
E
Error codes of the AS-i master commands ........................................... 60
Execution control flags .......................................................................... 14
G
General .................................................................................................... 8
General error codes ............................................................................... 61
H
Host flags ............................................................................................... 16
I
ifm weltweit • ifm worldwide • ifm à l’échelle internationale ................. 123
L
Legal and copyright information .............................................................. 5
M
Modification history .................................................................................. 6
