5
UK
4 Function
4.1 Communication, parameter setting and evaluation
• The unit shows the current system pressure on its display�
• It generates 2 output signals according to the parameter setting�
OUT1
• switching signal for pressure limit values�
OUT2
• switching signal for pressure limit values�
• analogue signal for pressure (4���20 mA or 0���10V)�
• It moreover provides the process data via IO-Link�
• The unit is laid out for fully bidirectional communication� So, the following op-
tions are possible:
-Remote display: reading and display of the current system pressure�
-Remote evaluation: transfer of switching signals (only with PP2001)�
-Remote parameter setting: reading and changing current parameter settings
with PP2001, FDT service program ifm Container or via IO-Link�
-Using PP2001 and the FDT service program ifm Container, the current pa-
rameter settings can be stored and transferred to other units of the same type�
The program library of the available DTM objects can be found at www�ifm�com
→ Service → Download.
Device-specific parameter lists for IO-Link parameter setting are available at:
www.ifm.com → Select your country → Data sheet direct:
