IFM Electronic E2D400 efector250, Инструкция по эксплуатации

Страница: 5 / 7

UK
5
► Insert the mounting frame with the Touch
Panel PC in the control cabinet and fasten
it.
3 Electrical connection
1: audio output, 3.5 mm jack socket
2: reset button
3: USB 2.0 interfaces
4: RJ45 Ethernet interfaces
5: AT/ATX switch
6: VGA connector
7: COM3 interface (RS232/422/485)
8: COM1 interface (RS232)
9: voltage supply 9...28 V DC
coaxial power connector, lockable
10: mains switch
The Touch Panel PC is supplied via an external power supply (supplied with the
device).
► Connect the DC power supply plug with the supply socket (9) of the Touch
Panel PC.
► Connect the sensor with the Touch Panel PC via one of the RJ45 Ethernet
interfaces (4).
You can find matching connection cables at:
www.ifm.com
.
In addition to the Ethernet interface the Touch Panel PC also has four USB 2.0 and
two serial interfaces.