IFM Electronic CR0401, Руководство по установке

Страница: 16 / 33

BasicController / BasicController
plus
16
8 Technical data
8.1 CR0401
Control systems
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen We reserve the right to make technical alterations without prior notice! 24.10.2014 CR0401 / page 1
CR0401
18
A B C D E F
N2
P/N1
25,5
127 163 145
12,5
8,5
6,5
10,5
79,7
112
LED
8,5
Mobile controller
BasicController
12 inputs
8 outputs
2 CAN interfaces
Programming
to IEC 61131-3
8...32 V DC
Technical data Modular control system
Usable as CANopen controller or intelligent I/O module
Mechanical data
Housing plastic housing (black)
Dimensions (H x W x D)
without cover
with EC0401 cover
with EC0402 cover and BasicDisplay
CR0451
163 x 112 x 25.5 mm
163 x 112 x 68 mm
163 x 112 x 73.4 mm
Installation  xing by means of 4 M4 screws to DIN 912 or DIN 7984 and 4 tubular rivets to
DIN 7340 (tubular rivets are supplied)
Connection AMP blade male terminals 6.3 mm, to be clipped into place and thus vibration-
resistant, protected against reverse polarity
contacts AMP timer, CuZn pre-tin-plated
core cross-section 0.5...2.5 mm²
Inputs
Outputs
Operating voltage , CAN bus
3 x 8-pole
2 x 8-pole
1 x 6-pole, 1 x 4-pole
Protection rating IP 20 (with cover and cable seal IP 54)
Operating/storage temperature -40...85° C / -40...85° C
Weight 0.30 kg
Electrical data
Operating voltage 8...32 V DC
Current consumption 45 mA (at 24 V DC)
Overvoltage
Undervoltage detection
Undervoltage shutdown
36 V for t ≤ 10 s
at U
B
≤ 7.8 V
at U
B
≤ 7.0 V
Processor Freescale PowerPC, 50 MHz
Memory (total) 208 Kbytes RAM / 1536 Kbytes Flash / 1 Kbyte FRAM
Memory allocation see BasicController system manual
www.ifm.com → data sheet search → e.g. CR0401 → Additional data
Device monitoring undervoltage monitoring
watchdog function
checksum test for program and system
excess temperature monitoring