IFM Electronic AS-i DP Series Скачать руководство пользователя

Страница: 36 / 44

device manual AS-i DP-Gateway

F10
PLC write protection

Not used in Profibus DP Gateway

6.1.4 Timeout error (code T00 ...

T11)

T00
Timeout communication master

The operating system has detected a timeout during communication with the master.

Possible causes:

Unacceptable interference on the 24V power supply.

Unacceptable interference on the AS-i power supply.

Unacceptably high electrostatic charges and

electromagnetic fields in close proximity of the device.

Rectification:

Ground the device via the DIN rail, connection of the FE terminal to the plant ground.

Use a switched-mode power supply to supply the device.

T01
Timeout system cycle

The operating system has found a timeout during the execution of a system cycle.

Possible cause:

Parts of the operating system in SRAM have been overwritten by the plc.

T02
Timeout ASI1 cmd channel 1

T03
Timeout ASI1 cmd channel 2

T04
Timeout ASI2 cmd channel 1

T05
Timeout ASI2 cmd channel 2

The operating system has found a timeout during the execution of a command to the master on the respective
channel.

Possible cause:

The status information of the command channel has been overwritten by the plc.

T06
Timeout PLC cycle

Not used in Profibus DP Gateway

T07
Timeout command channel

During the execution of a command started by the plc a timeout was found.

Possible causes:

The status information of the command channel has been overwritten by the integrated field

bus, e.g. Profibus DP.

T08
Timeout command channel request

During the attempt to start a command on the command channel a timeout was found.

Possible causes:

The

status information of the command channel has been overwritten by the plc.

Permanent use of the command

channel by the integrated field bus, e.g. Profibus DP.

T09
Timeout Fieldbus communication

A timeout was found during the communication of the device with the connected field bus, e.g. Profibus DP.

This

monitoring is running after a first communication of the device via the connected field bus.

Possible cause:

Field bus master has stopped communication, wire break on the connection cable.

6-36

Содержание AS-i DP Series













































Результаты поиска

Содержание AS-i DP Series

Отзывы:

Похожие инструкции для AS-i DP Series

Бренды по названию

Популярные бренды

IFM Electronic AS-i DP Series, Руководство по эксплуатации устройства

Результаты поиска

Содержание AS-i DP Series

Отзывы:

Похожие инструкции для AS-i DP Series

Бренды по названию

Популярные бренды