© iFeel Tactile Systems, 2018
10
push characteristics button (+)
up to the highest level (5 steps
possible)
choose audio signal with better
bass share
SF-PX cannot resolve vibration
frequencies higher than 400 Hz
control panel
does not
work, despite
SPX delivers
vibrations
every push onto any button of the
control panel should be indicated by
the red signal at the interface panel
check control panel function with
an audio signal with good bass
share
characteristics settings are without
effect with only high frequency audio
samples (e.g. flutes, bird singing )
Bluetooth
connection
not possible
reduce the distance between
audio source and SF-PX to 5
meters
Bluetooth-reach between SF-PX and
transmitter of the audio source is max
10 meters (air distance without any
obstacles)
if the SF-PX couples with the
audio device, but does not
connect, switch off and switch on
the SF-PX and try to connect
again.
switch off the Bluetooth modules of
other Bluetooth sending devices in
the room, most likely SF-PX cannot
pair with the right Bluetooth device
how do I
know that the
Bluetooth
connection is
established?
if the Bluetooth connection is
established the right LED (2) below
the on/off button flashes continuously
blue, the right LED (1) flashes blue
