ievo ultimate, Руководство по установке

Страница: 8 / 18

Installation
FLUSH MOUNTED INSTALLATION
Attach the reader back plate and the flush mounting plate to the back of the reader using the six (6) screws
provided. Do not over tighten the screws. Ensure both cables are fed through the holes as shown in green
Insert the four (4) security screws provided into
the wall as shown in the diagram. Ensure you
use the security tool provided.
7
Insert the facia cover
over the reader.
Ensure the facia is the
correct way up as
denoted by the arrows
on the internal of the
facia. The facia will
snap and lock into
place
NOTE: The reader should be placed within the DDA
standard height of approximately 1 meter
Ensure you use the correct fixing plug for the type of wall
you are fixing the reader to. Incorrect usage will result in
the reader being unsecure. Plaster board will require
correct brackets for installation.