Ier 540, Руководство пользователя

Страница: 19 / 44

19
b) Adjusting the Media Sensor Position
The media sensor must be correctly positioned to be able to
perform the following two functions:
•
Check the presence (or absence) of media under the
printhead
•
Sense the document positioning mark.
To adjust the position of the media sensor, proceed as follows:
1) Locate the pointer (2) on the sensor support (1) showing the
exact position of the sensor.
2) Move the sensor support and center the pointer (2) (and thus
the sensor) with regard to the positioning mark (4) on the
media (3).
NOTE
If the positioning mark is the translucent space
between labels (web) which can be sensed over the
entire width of the media, position the sensor
roughly in the center of the media.
Positioning mark:
translucent
space between
labels
Positioning mark:
hole
Positioning mark:
black mark
3 2
1
4