PEB-7605 Series User’s Manual
25
On-Chip channel 0/channel 1 PCI IDE
The motherboard chipset contains a PCI IDE interface with support for two IDE channels. These two IDE channels are for IDE1
and SATA1/2/3/4 connectors use. Select “
Enabled
” to activate the first and/or second IDE interface. Select “
Disabled
” to
deactivate the interface if you are going to install a primary and/or secondary add-in IDE interface. Options: Enabled (default)
、
Disabled
IDE channel 0/channel 1 Master/Slave PIO
Set all of these to
Auto
and let the BIOS determine if each drive is capable of Ultra DMA support, and its respective PIO mode.
IDE channel 0/channel 1 Master/Slave UDMA
Same as above.
IDE HDD Block Mode
Enabled is recommended for the best hard drive performance. Windows NT 4.0 users should set this to Disabled unless they can
confirm they have been updated with a Service Pack that will work with it.
4.6.2 Onboard Device
USB Controller
This option should be
enabled
if your system has a USB port installed on the system board. You will need to disable this feature
if you add a higher performance controller. Options: Enabled (default)
、
Disabled
USB 2.0 Controller
This option should be
enabled
if your system has a USB 2.0 device installed on the system board. You will need to
disable
this
feature if you install a USB 1.1 device.Options: Enabled (default)
、
Disabled
USB Keyboard Support
Enables
support for USB attached keyboards. Options: Disabled (default)
、
Enabled
