IEI Technology WAFER - E668EV ATX, Руководство пользователя

Страница: 51 / 59

51
4.13 Change Supervisor Password
You can set passwords for either supervisor or user password, or for
both of them. The differences between them are:
supervisor password:
can enter and change the settings of the setup menus.
user password:
can only access the setup menus, but can’t change anything of it. When
you select this option, the following message will appear at the center
of the screen to assist you in creating a password.
ENTER
PASSWORD:
Type the password, up to eight characters in length, and press <Enter>.
The password typed now will clear any previously existing password
within CMOS memory. You will be prompted to confirm the password.
Type the password again and press <Enter>. You may also press
<Esc> to abort the selection and not to enter a password.
To disable a password, just press <Enter> when you are prompted to
enter the password. A message which ask you to confirm the password