IEI Technology WAFER-945GSELVDS2-N270-R10 Скачать руководство пользователя страница 93

Страница: 93 / 140

WAFER-945GSELVDS2

Page 81

UDMA2

Ultra DMA mode 2, max transfer rate: 33.3 MB/s

UDMA3

Ultra DMA mode 3, max transfer rate: 44 MB/s (To use this

mode, it is required that an 80-conductor ATA cable is used.)

UDMA4

Ultra DMA mode 4, max transfer rate: 66.6 MB/s (To use this

mode, it is required that an 80-conductor ATA cable is used.)

UDMA5

Ultra DMA mode 5, max transfer rate: 99.9 MB/s (To use this

mode, it is required that an 80-conductor ATA cable is used.)

S.M.A.R.T [Auto]

Use the

S.M.A.R.T

option to auto-detect, disable or enable Self-Monitoring Analysis and

Reporting Technology (SMART) on the drive on the specified channel.

S.M.A.R.T

predicts

impending drive failures. The

S.M.A.R.T

BIOS option enables or disables this function.

Auto D

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the

32Bit Data Transfer

BIOS option to enables or disable 32-bit data transfers.

Disabled

Prevents the BIOS from using 32-bit data transfers.

Enabled D

EFAULT

Allows BIOS to use 32-bit data transfers on supported

hard disk drives.

Содержание WAFER-945GSELVDS2-N270-R10













































































































































Результаты поиска

Содержание WAFER-945GSELVDS2-N270-R10

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology WAFER-945GSELVDS2-N270-R10, Руководство пользователя

Результаты поиска

Содержание WAFER-945GSELVDS2-N270-R10

Отзывы:

Бренды по названию

Популярные бренды