IEI Technology UPC-F12C-ULT3 Скачать руководство пользователя страница 28

Страница: 28 / 114

UPC-F12C-ULT3 Panel PC

Page 14

3.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the maintenance of the

UPC-F12C-ULT3 may result in permanent damage to the

UPC-F12C-ULT3 and severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the UPC-F12C-ULT3. Dry climates are especially susceptible to ESD. It is

therefore critical that whenever the UPC-F12C-ULT3 is accessed internally, or any other

electrical component is handled, the following anti-static precautions are strictly adhered

to.



Wear an anti-static wristband

: Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.



Self-grounding

: Before handling the board, touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.



Use an anti-static pad

: When configuring the UPC-F12C-ULT3, place it on

an anti-static pad. This reduces the possibility of ESD damaging the

UPC-F12C-ULT3.



Only handle the edges of the PCB

: When handling the PCB, hold the PCB

by the edges.

Содержание UPC-F12C-ULT3



















































































































Результаты поиска

Содержание UPC-F12C-ULT3

Отзывы:

IEI Technology UPC-F12C-ULT3, Руководство пользователя, Страница: 28 / 114

Результаты поиска

Содержание UPC-F12C-ULT3

Отзывы: