IEI Technology PPC-5152-D525-E Скачать руководство пользователя страница 99

Страница: 99 / 132

PPC-5152-D525-E Panel PC

Page 87

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:



Chipset



Graphics



LAN



Touchscreen



USB

3.0

Installation instructions are given below.

6.2 Starting the Driver Program

To access the driver installation programs, please do the following.

Step 1:

Insert the CD-ROM that came with the system into a CD-ROM drive attached to

the system.

Step 2:

Click

PPC-5152-D525-E

Step 3:

A list of available drivers appears.

Step 0:

6.3 Chipset Driver Installation

To install the chipset driver, please do the following.

Step 1:

Access the driver list. (See

Section

Chipset

” and select the folder which corresponds to the operating system.

Step 3:

Locate the setup file and double click on it.

Содержание PPC-5152-D525-E





































































































































Результаты поиска

Содержание PPC-5152-D525-E

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology PPC-5152-D525-E, Руководство пользователя

Результаты поиска

Содержание PPC-5152-D525-E

Отзывы:

Бренды по названию

Популярные бренды