IEI Technology PPC-51 A-H61 Series, Руководство пользователя

Страница: 78 / 156

PPC-51xxA-H61 Panel PC
Page 65
Step 3:
Release the SO-DIMM module by pulling both the spring retainer clips outward
from the socket.
Step 4:
Grasp the SO-DIMM module by the edges and carefully pull it out of the socket.
Step 5:
Install the new SO-DIMM module by pushing it into the socket at an angle
(
Figure 4-2
).
Step 6:
Gently push the rear of the SO-DIMM module down (
Figure 4-2
). The spring
retainer clips clip into place and secure the SO-DIMM module in the socket.
Step 0:
Figure 4-2: SO-DIMM Module Installation
4.5 Elevated Platform Removal
The elevated platform supports the optical drive and the hard drive. It is not necessary to
remove the hard drive bracket to remove the elevated platform.
Step 1:
Unfasten the elevated platform screws on the top panel (
6
Figure 4-3
).
Figure 4-3: PPC-5150A-H61 Top Panel Elevated Platform Screws