IEI Technology PPC-3708, Руководство пользователя

Страница: 88 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
5 seconds
10 seconds
15 seconds
20 seconds
25 seconds
30 seconds
35 seconds (Default)
The best setting to use if the onboard IDE controllers are set to a specific IDE disk drive in
the AMI BIOS is “0 seconds” and a large majority of ultra ATA hard disk drives can be
detected well within “35 seconds” (the default setting).
ATA (PI) 80Pin Cable Detection [Host & Device]
When an Ultra ATA/66, an Ultra ATA/100 or an Ultra ATA/133 IDE hard disk drive is used,
an 80-conductor ATA cable must be used. The 80-conductor ATA cable is plug compatible
with the standard 40-conductor ATA cable. The system must detect the presence of
correct cable so that the AMIBIOS can instruct the drive to run at the correct speed for the
cable type detected.
The
ATA (PI) 80Pin Cable Detection
BIOS option determines how the IDE cable will be
detected.
Host & Device D
EFAULT
Both the motherboard onboard IDE controller and
IDE disk drive are used to detect the type of IDE
cable used.
Host
The motherboard onboard IDE controller detects
the type of IDE cable used.
Device
The IDE disk drive to detects the type of IDE cable
used.
IDE Master and IDE Slave
Page 88