IEI Technology PPC-3708, Руководство пользователя

Страница: 54 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
If the “CMOS Settings Wrong” message displays during the boot up process, try to correct
the fault by pressing the F1 to enter the CMOS Setup menu. Then do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After one of the above has been done, save the changes and exit the CMOS Setup menu.
JP4 DESCRIPTION
1 - 2 Normal (Default)
2 – 3 Clear CMOS
Table 3-2: Clear CMOS Jumper Settings
3.5.4 JP6: LCD Voltage Setup
WARNING!
Do not change this voltage. This voltage has been preset and is compatible
with the currently installed TFT LCD screen. Change this jumper setting
may cause damage to the system.
The LCD Voltage Setup jumper sets the voltage for the LCD screen. This setting MUST
NOT be changed.
JP6 DESCRIPTION
1-2 LCDVCC = +3.3V (default)
2-3 LCDVCC = +5V
Table 3-3: LCD Voltage Setup Jumper Settings
3.5.5 JP2: COM Port Jumper Setting
The COM Port jumper configures the COM2 serial port.
Page 54