IEI Technology PAC-400AI-C236, Руководство пользователя

Страница: 34 / 110

PAC-400AI-C236 Embedded System
Page 24
The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green
LED indicates activity on the port and the yellow LED indicates the port is linked. See
Table 3-3 .
Activity/Link LED Speed LED
STATUS DESCRIPTION STATUS DESCRIPTION
Off No link Off 10 Mbps connection
Yellow Linked Green 100 Mbps connection
Blinking TX/RX activity Orange 1 Gbps connection
Table 3-3: RJ-45 Ethernet Connector LEDs
3.6 Mounting the System
Two wall-mount plates are shipped with the PAC-400AI-C236. The wall-mount plates are
installed on the sides, at the bottom of the chassis. Each plate is secured to the chassis
with three retention screws. To install the wall-mount plates, please follow the steps
below:
Step 1:
Align the retention screw holes on the side of the chassis with the retention
screw holes in the wall-mount plate.
Step 2: Insert three retention screws into each wall-mount plate ( Figure 3-14 ).