3/4"
Hole
Lever should
snap securely
into place
with no play
R aceway
T ube
F lex-C ircuit
P ass the F lex C ircuit and the raceway tube through the 3/4" hole,
then mount the exterior housing through door preparation. Make
sure that the lock chassis and latch are properly engaged as
shown in F igure 6A.
(S ee F igures 6 and 6A)
1.
R emove two top center screws to battery case cover.
2.
Disassemble top battery cover and lower housing from interior backplate.
3.
R emove battery cover case and control electronics from top of backplate.
4.
F eed the F lexC ircuit from the raceway tube through the backplate, lock
washer and raceway nut.
5. While holding the interior backplate in position, loosely install the two thru-
bolts. (included in hardware kit)
6.
Tighten the raceway nut on the raceway tube. When this connection is tight,
secure the thru-bolts.
7. Install two screws to the backplate to the door (screws for wooden door
application included). The two predrilled holes on the backplate are located
below the raceway nut.
F igure 6A
Lock Housing
R etractor
Latch T ail
P osts
P rongs
Interior B ackplate
T hru-B olts
F lex-C ircuit
R aceway Nut
Latch
4
3
Installation Instructions
2 of 6
I n s ta l l i n g E x te r i o r H o u s i n g
F igure 6
I n s ta l l i n g I n te r i o r A s s e m b l y
( p a r t I )
NOTE : raceway nut, cylinder retainer, removal tool, mounting screws
F igure 7
4
and other items are included in the hardware pack.
