IEI Technology KINO-CV-KINO-CV-N26001 Скачать руководство пользователя страница 84

Страница: 84 / 164

KINO-CV-D25501/N26001 SBC

Page 70

Key

Function

Esc

Main Menu – Quit and do not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu --

Exit current page and return to Main Menu

General help, only for Status Page Setup Menu and Option

Page Setup Menu

Load optimized defaults

F10

Save changes and Exit BIOS

Table 5-1: BIOS Navigation Keys

5.1.3 Getting Help

When

is pressed a small help window describing the appropriate keys to use and the

possible selections for the highlighted item appears. To exit the Help Window press

the

key again.

5.1.4 Unable to Reboot After Configuration Changes

If the computer cannot boot after changes to the system configuration is made, CMOS

defaults. Use the jumper described in Chapter

5.1.5 BIOS Menu Bar

The

menu bar

on top of the BIOS screen has the following main items:

Main – Changes the basic system configuration.

Advanced – Changes the advanced system settings.

Chipset – Changes the chipset settings.

Boot – Changes the system boot configuration.

Security – Sets User and Supervisor Passwords.

Save & Exit – Selects exit options and loads default settings

The following sections completely describe the configuration options found in the menu

items at the top of the BIOS screen and listed above.

Содержание KINO-CV-KINO-CV-N26001





































































































































































Результаты поиска

Содержание KINO-CV-KINO-CV-N26001

Отзывы:

IEI Technology KINO-CV-KINO-CV-N26001, Руководство пользователя, Страница: 84 / 164

Результаты поиска

Содержание KINO-CV-KINO-CV-N26001

Отзывы: