manualshive.com logo in svg

IEI Technology KINO-CV-KINO-CV-N26001, Руководство пользователя, Страница: 74 / 164

Поделиться
Скачать
IEI Technology KINO-CV-KINO-CV-N26001 Скачать руководство пользователя страница 74

 

 

KINO-CV-D25501/N26001 SBC

Page 60 

both marked. Please make sure the keyboard and mouse are connected to the 

correct PS/2 connector.   

4.8 External Peripheral Interface Connection 

Devices can be connected to the external connectors. To install external devices, follow 

the directions in the subsections below. 

4.8.1 Audio Connector 

The audio jacks on the external audio connector enable the KINO-CV-D25501/N26001 to 

be connected to a stereo sound setup. To install the audio devices, follow the steps below. 

Step 1: 

Identify the audio plugs

. The plugs on your home theater system or speakers 

may not match the colors on the rear panel. If audio plugs are plugged into the 

wrong jacks, sound quality will be very bad. 

Step 2: 

Plug the audio plugs into the audio jacks

. Plug the audio plugs into the audio 

jacks. If the plugs on your speakers are different, an adapter will need to be used 

to plug them into the audio jacks. 

ƒ

 

Line Out port (Lime): 

Connects to a headphone or a speaker.   

ƒ

 

Microphone (Pink): 

Connects to a microphone.   

 

Figure 4-12: Audio Connector 

Содержание KINO-CV-KINO-CV-N26001





































































































































































Отзывы:

Нет отзывов