manualshive.com logo in svg

IEI Technology KINO-CV-KINO-CV-N26001, Руководство пользователя, Страница: 117 / 164

Поделиться
Скачать
IEI Technology KINO-CV-KINO-CV-N26001 Скачать руководство пользователя страница 117

 

 

KINO-CV-D25501/N26001 SBC 

Page 103

After completing the five initial setup procedures as described above, users can access 

the recovery tool by pressing <

F3

> while booting up the system. The detailed information 

of each function is described in 

Section B.5

. 

 NOTE: 

The initial setup procedures for Linux system are described in   

Section B.3

. 

B.1.1 System Requirement 

 NOTE: 

The recovery CD can only be used with IEI products. The software will 

fail to run and a warning message will appear when used on non-IEI 

hardware. 

 

To create the system backup, the main storage device must be split into two partitions 

(three partitions for Linux). The first partition will be for the operating system, while the 

second partition will be invisible to the operating system and contain the backup made by 

the one key recovery software. 

The partition created for recovery images must be big enough to contain both the factory 

default image and the user backup image. The size must be calculated before creating the 

Содержание KINO-CV-KINO-CV-N26001





































































































































































Отзывы:

Нет отзывов