IEI Technology KINO-9653, Руководство пользователя

Страница: 78 / 128

KINO-9653 Mini-ITX Motherboard
Page 66
ƒ
ATA (PI) 80Pin Cable Detection [Host & Device]
Use the ATA (PI) 80Pin Cable Detection option to enable the system to detect the
correct cable. When an Ultra ATA/66, an Ultra ATA/100 or an Ultra ATA/133 IDE hard disk
drive is used, an 80-conductor ATA cable must be used. The 80-conductor ATA cable is
plug compatible with the standard 40-conductor ATA cable. The system must detect the
presence of correct cable so that the AMIBIOS can instruct the drive to run at the correct
speed for the cable type detected.
Î
Host & Device D
EFAULT
Both the motherboard onboard IDE controller and
IDE disk drive are used to detect the type of IDE
cable used.
Î
Host
The motherboard onboard IDE controller detects
the type of IDE cable used.
Î
Device
The IDE disk drive to detects the type of IDE cable
used.
5.3.2.1 IDE Master, IDE Slave
Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
Primary IDE Master
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Device :Not Detected
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Type [Auto]
LBA/Large Mode [Auto]
Block (Multi-Sector Transfer) [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
S.M.A.R.T. [Auto]
32Bit Data Transfer
[Enabled]
Select the type of
device connected to
the system
ÅÆ
Select Screen
↑ ↓
Select Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 5: IDE Master and IDE Slave Configuration