IEI Technology KINO-9653, Руководство пользователя

Страница: 61 / 128

KINO-9653 Mini-ITX Motherboard
Page 49
Step 7: Insert the cable connectors . Once the cable connectors are properly aligned
with the USB connectors on the KINO-9653, connect the cable connectors to the
on-board connectors. See Figure 4-14 .
Figure 4-14: Dual USB Cable Connection
Step 8: Attach the USB connectors to the chassis . The USB 2.0 connectors each of
two retention screw holes. To secure the connectors to the chassis please refer
to the installation instructions that came with the chassis. Step 0:
4.7 External Peripheral Interface Connection
This section describes connecting devices to the external connectors on the KINO-9653.
4.7.1 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors . The locations of the USB connectors are shown
in Chapter 4 .
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the KINO-9653. See Figure 4-15 .