IEI Technology KINO-9454 Скачать руководство пользователя страница 78

Страница: 78 / 189

KINO-9454 Mini-ITX SBC

Page 78

5.4 CPU, CPU Cooling Kit and DIMM Installation

WARNING:

A CPU should never be turned on without the specified cooling kit

being installed. If the cooling kit (heat sink and fan) is not properly

installed and the system turned on, permanent damage to the CPU,

KINO-9454 and other electronic components attached to the system

may be incurred. Running a CPU without a cooling kit may also result

in injury to the user.

The CPU, CPU cooling kit and DIMM are the most critical components of the KINO-9454.

If one of these component is not installed the KINO-9454 cannot run.

5.4.1 Socket LGA775 CPU Installation

NOTE:

Enabling Hyper-Threading Technology on your system requires

meeting all of the platform requirements listed below:

CPU

: An Intel® Pentium 4 Processor with HT Technology

must be installed

Chipset

: An Intel® Chipset that supports HT Technology

(that has been met by the KINO-9454)

: An operating system that has optimizations for HT

Technology

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

Содержание KINO-9454






























































































































































































Результаты поиска

Содержание KINO-9454

Отзывы:

IEI Technology KINO-9454, Руководство пользователя, Страница: 78 / 189

Результаты поиска

Содержание KINO-9454

Отзывы: