IEI Technology KINO-9454 Скачать руководство пользователя страница 121

Страница: 121 / 189

KINO-9454 Mini-ITX SBC

Page 121

AT/ATX power [ATX power]

Use the

AT/ATX power

BIOS option to select the power supply that is connected to the

system.

AT power

An AT power supply is connected to the system

ATX power D

EFAULT

An ATX power supply is connected to the system

Power Button Mode [On/Off]

Use the

Power Button Mode

BIOS to specify how the power button functions.

On/Off D

EFAULT

When the power button is pressed the system is either

turned on or off

Suspend

When the power button is pressed the system goes into

suspend mode

Restore on AC Power Loss [Last State]

Use the

Restore on AC Power Loss

BIOS option to specify what state the system

returns to if there is a sudden loss of power to the system.

Power Off

The system remains turned off

Power On

The system turns on

Last State

EFAULT

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Resume on Ring [Enabled]

Use the

Resume on Ring

BIOS option to enable activity on the RI (ring in) modem line to

rouse the system from a suspend or standby state. That is, the system will be roused by

an incoming call on a modem.

Содержание KINO-9454






























































































































































































Результаты поиска

Содержание KINO-9454

Отзывы:

IEI Technology KINO-9454, Руководство пользователя, Страница: 121 / 189

Результаты поиска

Содержание KINO-9454

Отзывы: