IEI Technology KINO-9454 Скачать руководство пользователя страница 39

Страница: 39 / 189

KINO-9454 Mini-ITX SBC

Page 39

2.8.3.4 Super I/O Fan Speed Controller

The Super I/O fan speed controller enables the system to monitor the speed of the fan.

One of the pins on the fan connector is reserved for fan speed detection and interfaced to

the fan speed controller on the Super I/O. The fan speed is then reported in the BIOS.

2.8.3.5 Super I/O Keyboard Controller

The Super I/O keyboard controller can execute the 8042 instruction set. Some of the

keyboard controller features are listed below:

The 8042 instruction is compatible with a PS/2 keyboard and PS/2 mouse

Gate A20 and Keyboard reset output

Supports multiple keyboard power on events

Supports mouse double-click and/or mouse move power on events

2.8.4 Fintek F81216DG LPC Serial Port Chipset

The KINO-9454 has a Fintek F81216DG chipset onboard enables the addition of two

additional UART serial ports (COM3, COM4 and COM5). UART includes 16-byte

send/receive FIFO. The Fintek serial port chipset is interfaced to the ICH7 through the

LPC bus. Some of the features of the Fintek chipset are listed below:

Supports LPC interface

Totally provides 3 UART (16550 asynchronous) ports

2 x Pure UART

1 x UART+IR

One Watch dog timer with WDTOUT# signal

One Frequency input 24/48MHz

2.9 Environmental and Power Specifications

2.9.1 System Monitoring

Three thermal inputs on the KINO-9454 Super I/O Enhanced Hardware Monitor monitor

the following temperatures:

Содержание KINO-9454






























































































































































































Результаты поиска

Содержание KINO-9454

Отзывы:

IEI Technology KINO-9454, Руководство пользователя, Страница: 39 / 189

Результаты поиска

Содержание KINO-9454

Отзывы: