IEI Technology ITG-100-AL, Руководство пользователя

Страница: 26 / 107

ITG-100-AL Embedded System
Page 14
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the ITG-100-AL
may result in permanent damage to the ITG-100-AL and severe injury to
the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the WAFER series motherboard and the power module. (Dry climates are
especially susceptible to ESD.) It is therefore critical that whenever the ITG-100-AL is
opened and any electrical component handled, the following anti-static precautions are
strictly adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : When configuring the ITG-100-AL, place it on an
anti-static pad. This reduces the possibility of ESD damaging the ITG-100-AL.
3.2 Installation Precautions
During installation, be aware of the precautions below:

Read the user manual : The user manual provides a complete description of
the ITG-100-AL, installation instructions and configuration options.

DANGER! Disconnect Power : Power to the ITG-100-AL must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the ITG-100-AL is opened while the power cord is still connected
to an electrical outlet.