IEI Technology iSignager-1000-Q354, Руководство пользователя

Страница: 150 / 189

iSignager-1000-Q354 Digital Signage Player
Page 136
8.4.6.1 ODD Removal
To remove the ODD, please follow the steps below.
Step 1:
Power down the system.
Step 2:
Remove the cover case. See
Section 8.3.1
.
Step 3:
Disconnect the SATA cable from the rear of the ODD.
Step 4:
The ODD bracket is attached to the chassis by two retention screws. Remove
the two retention screws from the chassis (
Figure 8-16
).
Step 5:
Slide the ODD bracket toward the rear panel of the iSignager-1000-Q354 and
take out the ODD with bracket (
Figure 8-16
).
Figure 8-16: ODD Bracket Retention Screws
Step 6:
Remove the SATA cable from the rear of ODD by removing the two retention
screws (
Figure 8-17
).